14.11.2026 9 min

Where Bespoke Kitchens for Mallorca Are Made, and What Each Route Changes for the Buyer

Cream painted cabinetry scribed to an uneven plaster wall under a stone worktop, one oak drawer open, a terracotta floor

Key takeaways

  • A bespoke kitchen for Mallorca comes from one of three routes: an island workshop, a factory on the Spanish mainland, or a German or Italian maker sold through a showroom.
  • The route decides who measures, how the worktop is templated, whether the kitchen crosses by sea and who is on the island when a door needs adjusting.
  • The lead time depends on the route, and no honest figure exists without a survey; ask what it depends on.
  • A quote reads differently for each route: look for the named seller, the delivery, the worktop and the call-back.

Searching for kitchen makers or manufacturers on Mallorca returns directories and showroom pages, and very few of them say where the cabinetry is actually built. That is the question that matters, because it changes what happens before, during and after the fitting. The bespoke kitchens guide covers when a made-to-measure kitchen earns its cost and how the process runs; this article takes the one paragraph in it about where the kitchen is made and follows it through.

Who makes bespoke kitchens for Mallorca?

There are three routes. Many companies combine them, so the table describes the cabinetry, not the company.

RouteWhere the cabinetry is madeWho usually measures and fitsWhat reaches the island
Island workshopIn a workshop on the island, often one that belongs to the company that fits the kitchen.The same company in most cases. Confirm it in writing.Boards, hardware and stone may still be shipped in; the finished cabinetry is not.
Mainland Spanish factoryIn a factory on the Spanish mainland.An island company that sells it, or fitters the factory sends. The contract says which.Finished units, crossing by sea within Spain.
German or Italian import through a showroomIn a factory in Germany or Italy, within what that maker offers.The showroom’s own fitters or fitters it hires. Ask which.Finished units crossing a border and the sea.

Who measures the room, and who is responsible for the fit?

In an island workshop the person who measures usually works for the company that builds, so a wall that turns out not to be square is a conversation inside one firm. With a factory or an import the measuring and the making are in different places, and the drawing that travels between them has to be right before anything is cut. Ask who measured, whether the maker re-checks the dimensions before production, and who pays if a unit arrives that does not fit.

How is the worktop templated and fitted?

A stone or composite worktop is cut to the cabinets as they stand. A trade guide from Fine Homebuilding on creating countertop templates states that the cabinets must be set before the job can be measured, and that they cannot be moved after the countertop supplier has measured because countertops are fabricated to close tolerances. In practice the worktop is the last piece, and it waits for the cabinetry. With an island workshop the cabinets can be built, set and templated in one place and one calendar. With a kitchen that crosses by sea, the template waits for the delivery, so a late crossing delays the worktop as well. Ask who takes the template, when, and what happens to the worktop if a unit is replaced afterwards.

The worktops page covers the materials; the worktop guide compares them.

How does a kitchen made off the island reach Mallorca?

By sea, on a route that adds a crossing to the schedule and a place where damage can happen. Who carries the risk of the crossing is something the quote should say. Four things are worth settling before the order:

  • Who arranges and pays for the transport, and whether the quote includes it.
  • Who unloads, stores and carries the units into the house, and what the access is like.
  • Who checks the delivery against the order, and how a damaged or missing unit is reported.
  • Who orders the replacement, from where, and how long the kitchen waits for it.

Import paperwork and VAT: what the law text says

The Spanish VAT law, Ley 37/1992, defines its territory as Spanish territory including the adjacent islands, and, for Spain, lists the Canary Islands, Ceuta and Melilla as excluded from the EU tax area; the Balearic Islands are not among the exclusions. A kitchen moving from the mainland, Germany or Italy to Mallorca therefore moves within the EU tax area, and the same law treats goods that must be installed before they are handed over as supplied in Spanish territory when the installation is completed there (article 68). The practical question is who invoices, with which VAT number, and who is named as responsible for the transport.

This is a description of what the published text says, not tax advice. Rules change, so check the current consolidated text at the BOE or with the Agencia Tributaria, and ask the company to state in writing who invoices and whether the price includes IVA.

Who comes back when a door needs adjusting?

The company that sold the kitchen is the party the law holds to the contract. The consolidated consumer law, the Real Decreto Legislativo 1/2007, applies to goods that are yet to be produced or manufactured (article 114), counts correct installation as part of conformity (article 115), and makes the seller responsible for lack of conformity that exists at delivery and shows within three years (article 120, in the version in force from 1 January 2022). Article 125 allows a claim against the producer when going to the seller is impossible or an excessive burden. Two consequences follow. The name on the contract matters more than the name on the door, and an adjustment after the first summer is a request to a named company with an address on the island, not to a brand abroad.

A second point from the same law: article 103 lists goods made to the consumer’s specifications or clearly personalised among the contracts to which the right of withdrawal does not apply. A bespoke kitchen is the order you cannot simply send back, so read the contract before the first payment. This is a summary of two articles, not legal advice; the text and its amendments are at the BOE.

What decides the lead time?

No figure belongs here without a survey and a named maker, so here is what it depends on instead. The survey and the signed drawing come first, because production starts from them. Then the maker’s production queue, the materials chosen, and whether anything is a special order. Then the transport: nothing for an island workshop, a crossing for the other two routes. Then the building work, because the kitchen cannot be fitted until the room is ready, and the worktop cannot be templated until the cabinets are set. Ask for the lead time as a sequence with the dependencies named, not as a single number.

The timeline article shows where these stages sit in a whole renovation.

Questions to ask a maker or a showroom

  • Where is the cabinetry made, and where are the fronts and the worktop made?
  • Who measures every wall, and who signs off the drawing?
  • Who is the contracting party, and who invoices?
  • Who fits the kitchen, and are they employed by you or hired for the job?
  • Who takes the worktop template, and when?
  • Who arranges the transport, unloads and checks the delivery?
  • Who comes to adjust a door after the first summer, and from where?
  • How are replacement parts ordered, and from where do they come?

How to read a quote for each route

What to findIsland workshopMainland factoryGerman or Italian import
Who the contract is withThe company that builds and fits, named once.The island seller or the factory; the quote names it.The showroom or the foreign maker; the quote names it.
Survey and drawingSurvey by the company; the drawing is the contract.Who measured, and whether the factory re-checks.Who measured, and whether the maker’s drawing carries your dimensions.
DeliveryDelivery to the house and carrying in.The crossing, the unloading and the delivery check.The border, the crossing, the unloading and the delivery check.
WorktopIncluded or excluded, and who templates.Included or excluded, and who templates after the delivery.Included or excluded, and who templates after the delivery.
AdjustmentsA named visit for adjustments.Who attends, and whether the factory sends parts.Who attends, and where the parts come from.

Whichever route the quote describes, the bespoke kitchens page is where the request goes, the fitted kitchens page covers the ranges that are not made to the room, and the designers and architects page describes how a professional sits between the owner and the maker.

Are bespoke kitchens made on Mallorca?

Some are, in workshops that belong to the companies that fit them. Many are made on the mainland, in Germany or in Italy and fitted here. The first thing to ask is where the cabinetry is made.

Is an island workshop better than a factory?

Neither is better in general. An island workshop shortens the chain between the survey, the making and the call-back; a factory or an import widens the choice of systems and finishes. The route matters mainly because of who is on the island afterwards.

Does a German or Italian kitchen cost more to bring to Mallorca?

The transport is a cost that an island workshop does not have, and the quote should show it or say who pays it. This site states no figure, because the cost depends on the units, the route and the access to the house.

Is there customs paperwork for a kitchen from Germany or Italy?

The Spanish VAT law lists the Canary Islands, Ceuta and Melilla as excluded from the EU tax area and does not list the Balearic Islands, so a kitchen moving from Germany or Italy moves within the EU tax area. A kitchen from outside the EU is treated as an import. Check the current text at the BOE or with the Agencia Tributaria.

Can I return a bespoke kitchen if I change my mind?

The consumer law lists goods made to the consumer’s specifications among the contracts without a right of withdrawal (article 103). Read the contract and any cancellation terms before paying, and check the current text at the BOE.

This might be interesting to you

Vaulted kitchen with walnut cabinetry and a veined marble worktop and splashback, sunlight across a terracotta floor
10.08.2026 3 min

How Long Does a Kitchen Renovation Take in Mallorca?

The fitting is weeks. The wait before it, for cabinetry and stone that reach the island by sea, is o...

Kitchen with oak base units, a pale stone worktop and a stone sink, glass doors open to a terrace and the sea
14.08.2026 3 min

Choosing Kitchen Worktops in Mallorca: A Guide by Material

Marble, quartz, porcelain, granite, sintered stone, microcement and wood, sorted by what a worktop h...

Restaurant dining room with timber tables and a stone arch onto a steel kitchen, shutters closed and pendants lit
19.09.2026 3 min

Commercial Kitchen Renovation in Mallorca: How the Winter Closure Is Used

A restaurant kitchen is rebuilt in the weeks it is closed, backwards from the reopening date. What t...

Villa kitchen with a grey-veined marble island, oak cabinetry and white worktops, doors open to an outdoor kitchen
19.08.2026 3 min

Quartz vs Marble vs Porcelain Worktops: Which Suits a Mallorca Kitchen?

The three materials most kitchens here choose between, compared on what matters on the island: sun, ...

Mallorca Kitchens